Hurronsbury stocks 210 litre drums of Rydlyme which can be despatched same day across the Middle East and Africa.

Enquiries: email - sales@hurronsbury.com

Rydlyme is a non-hazardous, non-corrosive, non-injurious, non-toxic, yet fully biodegradable descaler, heavily fortified with wetting and penetrating agents which actually dissolves waterscale, lime, mud, rust, and other water formed deposits from water operated equipment. Once applied a film is left on the equipment that further delays the future build up of water formed deposits.

Rydlyme has the ability to dissolve approximately two pounds (1 Kilo) of calcium carbonate scale per U.S. gallon while at 70°F / 21°C, and in concentrated form. If the RYDLYME is diluted, it will still dissolve two pounds per gallon, but will require additional circulating time.

The solution has the ability to dissolve deposits from some equipment while in operation and without shutdown, if auxiliary coolers are incorporated.

Notes:

1. RYDLYME should be used as directed and at any temperature within the operating limits between 0°F / 18°C and 180°F / 82°C. If the solution does freeze, slush or thicken at the lower operating temperatures, and then thaws, there will be no performance reducing results. Please consult the manufacturer when temperatures above 180°F are encountered.

2. The solution does not deteriorate, oxidize, saponify, thicken or lose effectiveness for at least five years. Although almost any chemical reaction will react faster under elevated temperatures, RYDLYME should be applied at ambient temperatures (50°F / 10° C and 75°F / 24°C) with full effectiveness and results obtainable.

3. The solution is exothermic, but does not develop a substantial increase in temperature while dissolving water scale, lime, mud, rust or other water formed deposits.

4. The concentrated solution can be held, safely, in the open hand without deleterious affects. The solution is of a pleasant or characteristic odor, very similar to roasted almonds, and does not exude any obnoxious or unpleasant or toxic vapors.

5. RYDLYME does not corrode, erode, attack, oxidize or have other deleterious affects on virtually any metal or materials found in water systems such as:

COPPER FIBER LEATHER IRON
RUBBER STEEL TITANIUM GLASS

Or other materials found in heat exchangers, vacuum pumps, evaporators, condensers, and/or other water cooled, water heated, or water operated equipment when used as directed.

6. The exception to number 5 above, when using 100% concentrated (non-diluted) RYDLYME on magnesium, zinc, and/or aluminum, it could oxidize or pit. Furthermore, polished chrome and some alloys of stainless steel could become discolored. It is not recommended for use with concentrated solutions. The rule of thumb is that if the alloy is designed for use in a water system (aluminum engine block, aluminum mold, etc.), the alloy should be compatible with the RYDLYME solution. Otherwise, it is recommended that the RYDLYME be diluted50% or more with water when cleaning.

7. It is recommended, but not mandatory, that the RYDLYME solution be thoroughly mixed before using. Some settling of a black precipitate may occur, resulting in an amber colored liquid, but has no negative affects upon the performance of the solution.

8. The solution has a specific gravity of 1.045. The solution has a vaporization temperature of 213°F / 100°C, does NOT have an open or closed cup flash point and does not require neutralizers, as it is free rinsing with water.

9. RYDLYME is an electrolyte, as are most cleaning agents. An electrolyte is any liquid that will transfer small electrical currents. Examples: salt water, vinegar, Coca-Cola. An electrolyte may cause plating in some types of equipment. This means a transfer of small amounts of one metal onto another metal according to the nobility chart.

Hurronsbury

International: +44 790 069 2842
UAE: +971 50 340 9641
International Fax: +44 870 912 6717
Skype: Hurronsbury

www.hurronsbury.com